Microchip TCP/IP Stack + XC8 compiler (rehakmatej)
Hello I would like to compile TCP/IP Stack Demo App with using of XC8 and MPLAB X, but I don't see xc8 option in "Set Project Configuration". Can anyone explain me how to create TCP/IP Stack project...
View ArticlelwIP PIC32 port - new title : CycloneTCP a new open source stack for PIC32...
Hello, Does a PIC32 port for lwIP (open source TCP/IP Stack) exist ? Google wasn't finding anything worth mentioning for lwIP and PIC32 :(..
View Article50ohm pull up or pull down in LAN transceiver chip (hkartadi)
Hi all, Just want to ask:KSZ8851SNLI LAN transceiver TX+- RX+-is pulled down via 50ohm and series cap.ENC28J60 TX+- is pulled up 50ohm, but RX+- is pulled down 50ohm and series cap.I have seen other...
View ArticleCan't pass a filename as a string variable to GenericTCPClient (lcoulon)
Hello I use sprintf to compose RemoteURL and it with...
View ArticleFTP server for dsPIC33 & SD card (Jorge E.)
Hi, I'm new in the forum and the TCP/IP and I want to do a dynamic webpage into a PIC but what I only get is a static one and I've been looking for a way to enable an FTP server. I have no idea how...
View ArticleKSZ8863 SMI Read/Write Failed (krishna57)
Hi All, Hope i can get some help from you, I'm using Picochip Pc205 processor and KSZ8863 micrel switch in which i need to access the Global & advanced registers using SMI interface. The Encoding...
View ArticlePIC32 KSZ8863MLL ETH Problem PLEASE HELP (PICsProgrammer)
Hello Guy´s, I hope you can help me I have a PIC32MZ2048ECH100 and a Micrel 8863MLL PIC32 <-> 8863MLL connection over MII and default pin configuration and MAC to MAC connectionHarmony Stack...
View ArticleMAC address for new batch of ENC424J600 always reads 0 (djhosken)
Hi, I am busy debugging an issue we are having with a batch of our boards. The MAC(read from the ENC424J600 chip) address for all boards in this batch is 0. If I change the ENC424J600 chip it works as...
View ArticleHow to update a selected choice into an option box ? (lcoulon)
Hello I have an option box with multiple choices.I would like the option previously saved automaticaly selects the proper choice. I can see that value is correctly updated but i can't get the according...
View ArticleTCP/IP stack (vany)
Hi, I am trying to make TCP/IP stack work on TMS320F2812(DSP of TI) which is connect network through ENC28J60. The problem is that the register of TMS320F2812 is 16 bits and support 16 and 32 bits data...
View ArticleKSZ8795CLX strap in / standalone mode not working (adityagaddam)
Hi,I'm trying to use the KSZ8795 in a standalone (no configuration on startup) mode to make a 3 port switch (I don't care about ports 4 and 5). I am using magjacks on port 1 and 2 and port 3 is wired...
View ArticleLAN9252 Ethercat Slave in SPI Mode: will not enter OP state. (Risto Kojcev)
Hi, we also have some issues setting up the LAN9252 in op mode, by using SPI. The chip always goes into INIT E mode. Can someone provide details and share how we can set up properly the 9252 in SPI...
View ArticleLAN8720a PHY occasionally irresponsive. LEDs blink once every three seconds...
Greetings, I have the LAN8720a PHY connected to an NXP i.MX6UL CPU running Linux v4.1.Despite complying with the timings with regards to power up and reset of the PHY, there are rare occasions in which...
View ArticleFTP server, HTTP server and MPFS [P18f4680] (Jorge E.)
Hi, I'm about to start a project with MPFS and FTP as server into the PIC. I'm trying to use the project wizard but I have a lot of problems compiling it or making it work i.e. in the MACInit() this...
View ArticleProgram with an ethernet cable (jo1234)
Hello, I use PIC32MX795F512L with sample code from micochip "web_server_nvm_mpfs" I use interactive pagesWeb and it works fine.Now I would like to program my PIC32 with its Ethernet cable to program...
View ArticleLAN9252 Memory map for input/output (tcmichals)
The current application has a large amount of output acyclic data; 4K bytes every 10ms (output). Input is 512bytes.Can 4Kbytes be mapped into internal DPRAM? (Yes DPRAM is only 4K) What is the largest...
View ArticleBootloader with PIC32UBL (jo1234)
Hello, I use the Basic project located C: \ microchip \ harmony \ v1_08_01 \ apps \ bootloader. With the application PIC32UBL and I can program with the cable ethernet. Now I would like to join him to...
View ArticleUnable to set pins D3, D4, D5 and D6 in Demo App (Abin)
Hi all, I have a custom board in which I am running the latest legacy application (MLA 2013-06-15). In that I have made pins D3, D4, D5 and D6 short ( external connections). When I try to set the above...
View ArticlePIC32 + ENC28j60 + TCPIP stack use HTTP: CAN NOT SET STATIC IP ADDRESS (Shishi)
Hello every body Is there anyone that succeed to change IP address through network configuration tab? i have to add the point that: i do not have external eeprom or spi flash on my board so it seems...
View ArticlePIC18F67J60 Microchip Serial Bootloader (PICsProgrammer)
Hello @all, i try to use the Microchip Serial Bootloader AN1310 v1.05 my Problem is that i use a MAX3535 Transceiver with a Send Enable Pin connected to the PIC So i tried to Change the Bootloader to...
View Article