GPRS to LAN bridge using Microchip TCPIP stack (stoyanoff)
Hi! Is it possible to create GPRS to LAN bridge using the TCPIP stack for both sides - for the GPRS module(PPP) and standart Ethernet for the LAN. I have to use external TCPIP for my GPRS...
View ArticleUART2TCPBridge question (rbuck)
Can someone who has used the UART2TCPBridge feature of the TCPIP stack tell me if UART.c and UART.h are required? It appears everything for the UART is setup in the UART2TCPBridge c an h files. I am...
View ArticleLED CONTROLLING USING WEBPAGE (NEENA JOSEPH)
Hi,I am going to implement web server using pic.Actually now I want to control an LED using web page.For that I have downloaded the TCP/IP demo app and then connected my own board(designed using...
View ArticlePIC32 Ethernet Starter Kit, PHY and Ethernet switch (vgf)
Hi,I want to use 1 ethernet cable between PC (with GUI) and an ethernet device (= contains a gigabit camera, a gigabit switch and the PIC 32 starterkit II). Unfortunately the LAN9303 PHY daughter board...
View ArticleNetwork Connection using the Light TCP/IP Stack (Shade)
Hi, I'm working on an Ethernet-to-UART converter with PIC18F67J60 and Microchip TCP/IP Lite Stack, using the XC8 compiler.The device is functioning properly with my home network, but it won't connect...
View ArticleKSX8795 configuration (pitdibi)
Hi guys!In my application, I need an Ethernet transceiver for ATSAM4E. Furthermore, having to connect multiple devices on the network, I Decided to use KSZ8795, but I'm not sure if I've configured it...
View ArticleProgram with an ethernet cable (jo1234)
Hello, I use PIC32MX795F512L with sample code from micochip "web_server_nvm_mpfs" I use interactive pagesWeb and it works fine.Now I would like to program my PIC32 with its Ethernet cable to program...
View ArticleEthernet (mickster56)
I am new at MPLAB IDE and was hoping someone could help me setting up the Ethernet without Harmony.I need help to know what code to write and etc and then to test it by sending a packet and receiving...
View ArticleMQTT - Internet Of Things client for Microchip Stack! (DarioG)
I recently learnt about MQTT protocol for IoT - the world of tomorrow, 5billions of devices worldwide before 2020 (*if* a world will still be there of course :D not italy possibly (!) )...
View ArticleInterface USB Hub over Ethernet IP (Dag)
I have two USB controlled custom devices (HID) which I need to connect to Ethernet (RG45) and control over the Internet by a remote PC which has a custom USB control application for the said device....
View ArticleVariable manipulation not working (Abin)
Hi all, I am trying to read and process i2c data in my tcp/ip demo app. I have used the plib example and it works well (stand alone). When trying to do the same in my demo app, its not working. Below...
View ArticleLAN9352 Initialization (MCDriver)
We are using a LAN9352 Ethernet switch on our product. The Host bus interface is SPI. What causes the Byte Order Test Register to read 0xC3B2A190 instead of 0x87654321???? The processor reads this...
View ArticleCan i use VPN for my system? (loritharp)
What is Virtual private Network(VPN) ? I heard about VPN many times. I am actually confused with it. Does VPN offer virus protection? There are a number of systems that enable you to create networks...
View ArticleTCP PIC RAM size, STACK and HEAP size calculation (Abin)
Hi, I have a TCP/IP demo app running on PIC32MX695F512H in a custom board. Its TCP_PIC_RAM_SIZE is 13000ul, heap = 2300 and stack = 400. I am using XC32 compiler. When I am running code on...
View ArticleLAN9252 - change payload size and content from eCAT slave to master (tchin)
Hi,I am using EVB3-LAN9252-DIG-I/O as eCAT slave and TMDSICE3359 as eCAT master.The above set up works fine. In the sense, when using EC-Engineer in diagnosis mode (PC acts as eCAT master and...
View ArticleEthernet Problem (Antimatter)
I have written some code that sends out a dhcpdiscover packet. Processor is the 18F97j60. The PIC-WEB-EK board specifically.I am using WireShark to monitor the packets. Here's the problem:If I send a...
View ArticleLooking for Ethernet examples for LAN9250 with a PIC32MX MCU using the PMP...
Hello, I have a custom designed board with the PIC32MX575F512L MCU and the LAN9250 Ethernet chip. They communicate using the Parallel Master Port (PMP) on the PIC32 MCU. I think the hardware is...
View ArticleSupport to MRF24WNOMA (Mariano H. Caballero)
Hi all. From some years ago I was using the Microchip TCP/IP stack v5.36 in several custom board with a PIC24FJ256GA110 and an ENC424J600. Now I have to migrate one of these boards to a new custom...
View Articleenc28j60 and pic18f4620 example project? (gokhan60)
hi, "C:\Microchip Solutions v2012-10-15\TCPIP\Demo App" I am can't compiled the project. Because, I can not select xc8. Employee have a simple example? http://s16.postimg.org/ylb7z0r4l/s_r_m.png..
View ArticleKSZ8895 RMII connection (lterrier)
We use KZ8895 ethernet switch with one port on RMII link to an external Wifi module. So MAC interface of SW5 of the switch connected to MAC interface of the Wifi module (ConnectOne NanoSMT Module). the...
View Article